C001E
Hazardous Energy Source Lockout/Tagout
(English or Spanish)
(10 min.)
Mandatory
training for both "affected" and
"authorized" personnel. Describes
lockout/tagout, how to control potential machine and
equipment accidents that may be started accidentally
through a variety of energy sources.
|
|
C002E
Ground Fault Circuit Interrupter (GFCI)
(English or Spanish)
(11 min.)
Designed to train all employees in the use
of GFCI and how the system operates. Program also
explains elements of the mandatory GFCI written program.
Will increase electrical safety awareness.
|
|
C003E
Hand & Power Tool Safety
(English or Spanish)
(13 min.)
Meets training requirements for
employees using hand and power tools. Emphasis
on individual's responsibility, equipment
maintenance, and general safety rules in the use of these
tools.
|
|
C004E
Ladder Safety in Construction
(English or Spanish)
(9 min.)
Designed for
step and straight ladders. Defines safety
requirements, belt buckle rule, 4:1 ratio of straight
ladders, how to reduce ladder injuries, and unsafe
behavior.
|
|
C005E
Crane Safety
(English or Spanish)
(13 min.)
Crane operators have certain
responsibilities, but each person on the job site also has
a responsibility when working near cranes. Excellent
program in demonstrating safety practices.
|
|
C006E
Backhoe - Loader Operations
(English or Spanish)
(9 min.)
Discusses general safety practices,
operating rules, and maintenance procedures for operators
of this equipment.
|
|
C007E
Dump Truck Safety
(English or Spanish)
(15 min.)
Safety awareness program that emphasizes
job site safety procedures for operators.
Reviews checklist on daily maintenance inspections, and
loading/ unloading procedures.
|
|
C008E
Construction Forklift Safety
(English or Spanish)
(15 min.)
Meets mandatory training requirements for
forklift operators on the job site. Details forklift
engineering principles, safe operating rules, and operator
maintenance. Excellent program to improve
forklift performance and safety.
|
|
C009E
Gas Welding Safety
(English or Spanish)
(14 min.)
Teaches basic safety rules,
operating procedures, and safety awareness. Strongly
supports fire prevention. Excellent program for the
experienced or inexperienced welder.
|
|
C010E
Arc Welding Safety
(English or Spanish)
(11 min.)
This program emphasizes basic safety rules,
operating procedures, and enhances the arc welder's
awareness of their responsibility for safety.
|
|
C011E
Safe Handling of Compressed Gas Cylinders
(English or Spanish)
(8 min.)
This program is aimed at the
potential hazards and safety procedures required for using
and handling compressed gas cylinders.
|
|
C012E
Storing Compressed Gas Cylinders Safely
(English or Spanish)
(10 min.)
Highlights the requirements for proper
storing, specific rules, and general safety procedures
needed in storing these cylinders.
|
|
C013E
Portable Grinders & Abrasive Wheels
(English or Spanish)
(13 min.)
This program includes general safety rules,
ring testing, handling of abrasive wheels, and how to
prevent injuries when operating this equipment.
|
|
C014E
Powder Actuated Tools
(English or Spanish)
(10 min.)
Operating these tools requires appropriate
training. Defines equipment, types of loads,
potential hazards, and appropriate safety procedures when
operating this equipment.
|
|
C015E
Scaffold Safety
(English or Spanish)
(8 min.)
Excellent training program for anyone
working on or near scaffolding. Attention given to
safety rules, operating procedures, and safe use of
scaffolds. Meets scaffold training requirements.
|
|
C016E
Signs and Barricades
(English)
(10 min.)
Overview of different types of signs and
barricades found on construction sites. The importance of
adhering to the instructions/restrictions of these signs
is featured in this program.
|
|
C017E
Overhead Pendant Hoist Safety
(English)
(14 min.)
The safety rules and guidance in this
program apply to all operations that involve the use of
overhead pendant hoists installed or attached to
buildings.
|
|
C018E
Scissor Lift Safety
(English)
(10 min.)
This program is designed to show the proper
way to operate a scissor lift. Topics include safe use and
operation, maneuvering hazards, working near electricity,
and body harnesses.
|
|
C020E
Working Safely with Compressed Air
(English)
(16 min.)
Program
is designed to teach the hazards of working with
compressed air and compressed air power tools. Shows
incidences where employees were hurt by playing around
with compressed air.
|
|
C022E
Front End Loader Safety
(English)
(14 min.)
A versatile piece of equipment that has
become popular for many industries. This program discusses
the safety procedures when working with this type of
equipment.
|
Equipment
Safety
